|
| |
|
|
Design of linear motor with permanent magnets
Čech, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. Each type of currently used linear motors is briefly introduced and also its principle and characteristics are described, including its specific application. The second part of the thesis deals with the design of an equivalent magnetic circuit model of a linear iron-core linear motor. Hereafter, the proposed design will be used to simulate the distribution of magnetic flux in the linear motor. The evaluated flux-density distribution in the air gap is later compared with the results obtained with finite element method. The thrust is then calculated from the flux-density and the estimated value is compared with the value listed in datasheet.
|
|
|
Microphotovoltaic systems
Nováček, Richard ; Jandová, Kristýna (referee) ; Vaněk, Jiří (advisor)
Master thesis deals with photovoltaic components and their principles. Evaluate the types of photovoltaic systems and their impact on the transmission system. The thesis deals with financial support to small and micro-photovoltaic systems, which can be used in terms of legislation of the Czech Republic. There are also described the changes in the amendment to the energy act and effect on the price of electricity in households. Compared with the domestic photovoltaic rest of the world and the view of the German energy concept. Part of the theoretical design of a hybrid photovoltaic plant, including the use of heat pump. Thesis deals with using hybrid photovoltaic plant and economic viability of the proposed system. The last part deals with the implementation of the proposed system and assesses the true value from those anticipated in the design.
|
|
| |
|
|
Design of Snowmobile
Červený, Pavel ; Zdařil, Zdeněk (referee) ; Sládek, Josef (advisor)
This thesis deals with design of snowmobile with hybrid drive. Such a kind of product is supposed to create a new category of snowmobiles in the near future, which is main motivation point. The aim is to design comprehensive product reflecting ergonomical and technological requirements. Center of focus of the project is design that brings new elegant timeless solution.
|
|
|
City House – Mixet Use Architecture
Starý, Ondřej ; Urbášková,, Hana (referee) ; Menšíková, Naděžda (advisor)
The main goal of the project is to design a city house near the central part of Brno as an alternative for the existing monofunctional zones and finding out the most suitable functions for the area. The idea is based on a compact city block which communicates with the events on the streets and connects them together to the house via inner atrium. Within the intensive urban structure, housing was chosen for the most important component because nowadays it disappears from the city centres. As the prerequisite for the high-quality living, the residential floors were raised on a three-storey platform which integrates the culture, offices and the commercial use. The roof of the platform is also used as a green roof terrace with a lot of vegetation which protects the living against the polution and noise from the traffic. So it becomes a safe and calm place for the relaxation and children´s games in a busy part of the city. The important point of view where the emphasis was placed was connecting all the functions together not only within the house itself, but also within the range of the whole city. The house functions and the street area are mutually connected via inner public atrium which becomes the important people meeting site. The residential floors are connected to the rest of the house through the large roof skylight which allows the sun rays to reach the lower floors. So the city house doesn´t hide its purpose on its own, but rather "lives together with the city".
|
|
|
Aspects impact trends in the operation technology of civil aviation aircraft
Korytář, Jan ; Šplíchal, Miroslav (referee) ; Chlebek, Jiří (advisor)
The aim of the work is a general description of the effects on air traffic and aircraft. The first part of the work is devoted to a brief description of the development of individual technical parameters and performance of aircraft from the 1920s to the present with an assessment of the effects. The second part of the work is about the influence of current requirements and the third part is a general view of the future development of construction and technology for more economical and environmentally friendly air transport
|
|
|
Mechanical-hydraulic model of vehical energy regeneration
Pisklák, Jan ; Vrbka, Martin (referee) ; Nevrlý, Josef (advisor)
This bachelor thesis is a research about mathematic-physical model of vehicle’s kinetic energy regeneration. Mr. Pourmovahed A. et al. were dealing with this problem. He used the method of the determinated thermal time constants. Pourmovahed continued in study reports written by Green W. L. and Otis D.. His scientific work covers the analytical treatment which is compared with an experimental tests.
|
|
|
Alternative Drive of Automobile
Dubský, Jiří ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor work deal with problems alternative drive for automobile with narrower intent on hybrid drive. Features run - down and description possible options for drive cars. Further is focused on cars with hybrid drive and on problems hereof unconventional drive with presentation characteristic feature, advantages and disadvantage.
|
|
|
Vehicle hybrid drive
Novák, Miroslav ; Prokop, Aleš (referee) ; Laurinec, Marián (advisor)
This bachelor thesis creates overview a modern hybrid drives car. In the thesis, there are the advantages and disadvantages all hybrid drives, availability and economy of operation. There is comparison of hybrid drives with internal combustion engines in conclusion.
|
guest ::
